LPC1113
技术资料——
LPC1113 PDF技术资料
| LPC1113 存储器 | |
|---|---|
| Flash (KB) | 24 |
| RAM (kB) | 8 |
| LPC1113 其他参数 | |
| fmax (MHz) | 50 |
| I/Opins | 42 |
| UART | 1 |
| I²C | 1 |
| I²S | - |
| SPI | 2 |
| SSP | 2 |
| ADC | 8 |
| DAC | - |
| 定时器 | 5 |
| PWM | 11 |
| I/O 电压 (V) | 3.3 |
| CPU 电压 (V) | 3.3 |
| LPC1113 封装与引脚 | |
| LQFP48 | |
LPC1113 概述
The LPC1113 devices are a ARM Cortex-M0 based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures.
The LPC1113 devices operate at CPU frequencies of up to 50 MHz.
LPC1113 特性
- System
- ARM Cortex-M0 processor, running at frequencies of up to 50 MHz
- ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).
- Serial Wire Debug.
- System tick timer.
- Memory
- 24 kB on-chip flash programming memory.
- 8 kB SRAM.
- In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.
- Digital peripherals
- Up to 42 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors.
- GPIO pins can be used as edge and level sensitive interrupt sources.
- High-current output driver (20 mA) on one pin.
- High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
- Four general purpose counter/timers with a total of four capture inputs and 13 match outputs.
- Programmable WatchDog Timer (WDT)
- Analog peripherals
- 10-bit ADC with input multiplexing among 8 pins.
