OLED 95RGB Draw
来自Waveshare Wiki
图片取模
使用Image2Lcd进行去取模
运行Img2Lcd.exe，点击打开，选择my car.bmp，输出数据类型：C语言数组（*.c）,扫描模式：水平扫描，输出灰度：单色。
最大宽度和高度由输入图像的实际值决定，这里是101和46。点击保存，生成相应的数组。
具体设置如下图：
这里以默认的代码为例：
在Fonts.c中添加上面生成的数组：
const uint8_t c_my_car[598] = { /* 0X00,0X01,0X65,0X00,0X2E,0X00, */
0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X14,0X00,0X00,0X00,0X00,0X00,0X00,0X06,0X30,
0X01,0XE0,0X00,0X00,0X2A,0X00,0X00,0XD8,0X00,0X00,0X00,0X0F,0X7B,0X63,0XE0,0X00,
0X00,0X22,0X00,0X01,0X24,0X00,0X00,0X00,0X0F,0XFB,0X63,0X07,0X34,0X00,0X14,0X00,
0X01,0X04,0X00,0X00,0X00,0X0D,0XDB,0X63,0X01,0XBC,0X00,0X08,0X00,0X00,0X88,0X00,
0X00,0X00,0X0C,0X1B,0X63,0X07,0XB0,0X00,0X00,0X00,0X00,0X50,0X00,0X00,0X00,0X0C,
0X1B,0X63,0XED,0XB0,0XDB,0X00,0X01,0X00,0X20,0X00,0X00,0X00,0X0C,0X19,0XE1,0XE7,
0XB0,0XDB,0X00,0X02,0X00,0X00,0X00,0X00,0X00,0X0C,0X19,0XE1,0XE7,0XB0,0XDB,0X00,
0X02,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X60,0X00,0X00,0X00,0X00,0X04,0X00,0X00,
0X00,0X00,0X00,0X00,0X03,0XC0,0X00,0X00,0X00,0X00,0X08,0X00,0X00,0X00,0X00,0X00,
0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X08,0X05,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
0X00,0X00,0X00,0X00,0X10,0X0A,0X80,0X00,0X00,0X00,0X00,0X00,0X0A,0X00,0X00,0XFF,
0XF8,0XE0,0X05,0X00,0X00,0X00,0X00,0X06,0XC0,0X15,0X00,0X1F,0XFF,0XFF,0XC0,0X02,
0X00,0X00,0X00,0X00,0X09,0X20,0X11,0X00,0XFB,0XFF,0XE1,0XF8,0X00,0X00,0X00,0X00,
0X00,0X08,0X20,0X0A,0X03,0X9F,0X00,0X9E,0X3E,0X00,0X00,0X00,0X00,0X00,0X04,0X40,
0X04,0X0E,0X70,0X00,0X81,0XC7,0X80,0X01,0X40,0X00,0X00,0X02,0X80,0X00,0X1D,0X80,
0X00,0XE0,0X61,0XE0,0X02,0XA0,0X00,0X00,0X01,0X00,0X00,0X77,0X9F,0XFC,0XF0,0X18,
0XF8,0X02,0X20,0X00,0X00,0X00,0X00,0X01,0XDF,0X00,0X00,0XF3,0X0C,0X3C,0X01,0X40,
0X00,0X00,0X00,0X00,0X03,0X9E,0X00,0X00,0XF8,0X06,0X1E,0X00,0X80,0X00,0X00,0X00,
0X00,0X07,0X0E,0X30,0X01,0XFC,0X7F,0X07,0X00,0X00,0X00,0X00,0X00,0X00,0X07,0X0E,
0X30,0X01,0XFC,0X7F,0X07,0X00,0X00,0X00,0X00,0X00,0X00,0X7E,0XFF,0XFF,0XFF,0XFF,
0XFF,0X83,0XC0,0X00,0X00,0X00,0X00,0X0F,0XFD,0XFF,0XFF,0XFF,0XFF,0XFC,0X01,0XF0,
0X00,0X00,0X00,0X00,0X3F,0X81,0XFF,0X00,0X00,0X00,0X00,0X1F,0XF0,0X00,0X00,0X00,
0X00,0XFE,0XF0,0X00,0X00,0X01,0X00,0X00,0XC0,0X1C,0X00,0X00,0X00,0X03,0XC0,0X07,
0X80,0X00,0X03,0XE0,0X07,0X00,0X1C,0X00,0X00,0X00,0X03,0X80,0X03,0X40,0X00,0X03,
0XE0,0X0C,0X00,0X0E,0X00,0X00,0X00,0X07,0X00,0X00,0XC0,0X00,0X00,0X20,0X18,0X00,
0X07,0X00,0X00,0X00,0X09,0X01,0X80,0X60,0X00,0X00,0X20,0X73,0X9F,0X03,0X80,0X00,
0X00,0X1E,0X0F,0XF2,0X20,0X00,0X00,0X20,0X67,0XFF,0XC1,0XC0,0X00,0X00,0X1E,0X1F,
0XF9,0X30,0X00,0X00,0X20,0XEF,0XFF,0XE0,0XE0,0X00,0X00,0X38,0X3F,0XFC,0X90,0X00,
0X00,0X20,0XCB,0XFF,0XF9,0XF0,0X00,0X00,0X7F,0X7F,0XFE,0X10,0X00,0X00,0X20,0XDB,
0XFF,0XFF,0XF0,0X00,0X00,0X6E,0XF9,0XBF,0X10,0X00,0X00,0X20,0XF7,0XED,0XFF,0XF0,
0X00,0X00,0X7C,0XFC,0X3F,0X10,0X00,0X00,0X20,0X67,0XE1,0XFD,0XE0,0X00,0X00,0X7C,
0XFC,0X3F,0X10,0X00,0X00,0X20,0X67,0XE1,0XFD,0XE0,0X00,0X00,0X38,0XFC,0X3F,0X18,
0X00,0X00,0X20,0X87,0XE0,0XFD,0XC0,0X00,0X00,0X38,0XF1,0X8F,0X18,0X00,0X1F,0XE7,
0X87,0X9C,0X7D,0XC0,0X00,0X00,0X1C,0XFE,0X1F,0X81,0XFF,0XFF,0XC0,0X0F,0XE0,0XFF,
0X80,0X00,0X00,0X0C,0XFC,0X3F,0X80,0X00,0X00,0X00,0X0F,0XE1,0XF8,0X00,0X00,0X00,
0X00,0XF9,0XBF,0XFF,0XFF,0XFF,0XFF,0XFF,0XEC,0XFE,0X00,0X00,0X00,0X03,0XF9,0XBF,
0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XC0,0X00,0X00,0X0F,0XFF,0XFF,0XFF,0XFF,0XFF,
0XFF,0XFF,0XFF,0XFF,0XC0,0X00,};在Fonts.h中添加声明：
extern const uint8_t c_my_car[598];
在main.c中修改代码如下即可：
#include "LIB_Config.h"
int main(void)
{
system_init();
ssd1331_draw_bitmap(0, 1, &c_my_car[0], 101, 46, YELLOW);
while (1) {
}
}具体代码：:0.95inch RGB OLED Open103C
扩展
同样，汉字取模方法类似，这里使用LcmZimo(链接：https://pan.baidu.com/s/10sSyEJGG-ltjWEdqr7hiKw 提取码：hj21 )进行取模，默认按下图设置
其中红色部分不可修改，其它可按实际需要选择，点击确认参数后，开始输入相应的中文字符串进行取模。用显示图片类似的方法保存到工程中，调用时注意数组的边界，如使用16点阵，则在显示图片的大小都设置为16。
用户也可在函数ssd1331_draw_bitmap的基础上修改为相应的显示中文字符函数。
在Fonts.c中添加上面生成的数组：
const uint8_t han_char[] =
{
0x00,0x00,0x40,0x08,0x37,0xFC,0x10,0x08,
0x82,0x08,0x62,0x08,0x22,0x10,0x09,0x10,
0x11,0x20,0x20,0xA0,0xE0,0x40,0x20,0xA0,
0x21,0x10,0x22,0x08,0x24,0x0E,0x08,0x04
};在Fonts.h中添加声明：
extern const uint8_t han_char[];
在main.c中修改代码如下即可：
#include "LIB_Config.h"
int main(void)
{
system_init();
ssd1331_draw_bitmap(0, 1, &han_char[0], 16, 16, RED);
while (1) {
}
}具体代码：